Direction for Use: Read safety information carefully before use. Retain instructions for future reference. Always keep unit directed away from your face at all times. 1. Check that your automatic device is in the off position. The control button is located under the top cover of the device. 2. To open the device, hold the bottom of the device, then twist the top half of the device counter clockwise. a. Before inserting the aerosol refill, ensure the red lever inside the device is pushed up. Then insert the aerosol refill into the bottom half of the device. b. To close the device, place the top half into bottom half and twist clockwise to lock together until a click can be heard, ensuring the spray nozzle/hole is pointing away from the face. 3. Insert 2 AA/LR6 batteries. Ensure the positive (+) and negative (-) terminals are aligned correctly. a. Set the device by setting the fragrance intensity control (located under the top cover of the device) to the need of your home – low, medium, high. b. Replace the top cover after inserting batteries. 4. Directing the device away from your face, place the device where chosen. Ensure the device is place at least 6 feet from the floor level. When activated, the device will spray after a delay of 15 seconds. If there's no spray after 15 seconds, switch off the device: a. Check that batteries are inserted correctly. b. Remove aerosol refill and push up red lever (see diagram number 2). 5. The aerosol refill will require changing when the fragrance is no longer emitted. Directing the device away from the face, turn the control button to the off position. Replace the aerosol refill, and select your chosen fragrance intensity level.