Directions

Read charger instructions before use. Charging Instructions: 1.) Load NiMH batteries into the charger. Insert batteries into charging slots with the (+) and (-) ends oriented correctly. To charge either 2 or 4 AA/AAA use the following positions: Position Chart. 2.) Plug the charger into an AC outlet. 3.) Charging/LED Indication: LED lights will cycle through red and then green when batteries are first inserted correctly and charger is plugged in; LED lights will turn red when batteries are charging; LED lights will blink green when batteries are ready to use; LED lights will turn green when batteries become charged. LED lights will blink red if abnormal conditions are detected during charging, charging will stop. If blinking red LED is encountered, first ensure you are attempting to charge a NiMH AA or AAA battery only. If yes, remove and reinsert the NiMH battery. If battery has become heated, it may be damaged. Insert a new NiMH battery. 4.) Storage: Unplug the charger and remove the batteries, once charging is complete. Notes & Usage Tips: 1. Batteries will automatically stop charging when full charge is reached. 2. Safety protections will prevent battery from overcharging. 3. Batteries that are new or have been store for an extended period may need to be charged and used 2-3 times before optimal charge performances achieved. 4. New non-pre-charged batteries may require charging before use. 5. This charger is capable of accepting 100-240 V AC, 50/60 Hz and, therefore, can be used overseas with a corresponding regional plug converter. 6. Charging time may vary based on battery capacity (mAh). 7. Maximum capacity: AA 2500 mAh, AAA 900 mAh.