Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
Rust in your cooling system can dramatically reduce cooling system efficiency. Prestone® Radiator Anti-Rust with Water Pump Lube coats and protects key cooling system metals.
Extends the life of water pumps and cooling system components.
Directions
Directions: 1. With engine off and cool, remove radiator cap. *2. Shake bottle well and pour entire contents of Prestone® Radiator Anti-Rust with Water Pump Lube into radiator and fill with water. One bottle treats cooling systems up to 12 quarts. For systems larger than 12 quarts, use two bottles. 3. Replace radiator cap to fully closed position. Run engine for 10 minutes after reaching normal operating temperature to mix thoroughly. Caution: Do not remove radiator cap while cooling system is hot. Allow system to cool before removing cap. Check owner's manual for additional information on cap removal, system capacity, recommended coolant and maintenance schedule. After using product, wash exposed skin thoroughly with soap and water. *The cap on newer vehicles may be located on a remote, pressurized overflow reservoir. Follow instructions given for radiators, but add product and coolant to reservoir. Much longer running time may be needed to introduce product into the system.
Warnings
Harmful or fatal if swallowed. Do not swallow. Avoid contact with eyes, skin and clothing. Wash with soap and water after handling. Contains petroleum distillates. First Aid: If swallowed, do not induce vomiting. Call a physician or poison center immediately. Eye Contact: Flush with water. Seek medical attention if irritation persists. Skin Contact: Wash thoroughly with soap and water. Seek medical attention if irritation persists. If Inhaled: Move to fresh air. Seek medical attention if symptoms persist. Intentional concentration and inhalation of vapors may be harmful or fatal. Keep out of reach of children.
About
Details
Rust in your cooling system can dramatically reduce cooling system efficiency. Prestone® Radiator Anti-Rust with Water Pump Lube coats and protects key cooling system metals.
Extends the life of water pumps and cooling system components.
Directions
Directions: 1. With engine off and cool, remove radiator cap. *2. Shake bottle well and pour entire contents of Prestone® Radiator Anti-Rust with Water Pump Lube into radiator and fill with water. One bottle treats cooling systems up to 12 quarts. For systems larger than 12 quarts, use two bottles. 3. Replace radiator cap to fully closed position. Run engine for 10 minutes after reaching normal operating temperature to mix thoroughly. Caution: Do not remove radiator cap while cooling system is hot. Allow system to cool before removing cap. Check owner's manual for additional information on cap removal, system capacity, recommended coolant and maintenance schedule. After using product, wash exposed skin thoroughly with soap and water. *The cap on newer vehicles may be located on a remote, pressurized overflow reservoir. Follow instructions given for radiators, but add product and coolant to reservoir. Much longer running time may be needed to introduce product into the system.
Warnings
Harmful or fatal if swallowed. Do not swallow. Avoid contact with eyes, skin and clothing. Wash with soap and water after handling. Contains petroleum distillates. First Aid: If swallowed, do not induce vomiting. Call a physician or poison center immediately. Eye Contact: Flush with water. Seek medical attention if irritation persists. Skin Contact: Wash thoroughly with soap and water. Seek medical attention if irritation persists. If Inhaled: Move to fresh air. Seek medical attention if symptoms persist. Intentional concentration and inhalation of vapors may be harmful or fatal. Keep out of reach of children.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.