Details

Ultra fast dry. No residue. Instantly cleans & decreases metal parts, tools & brakes. Quickly cleans and degreases metal parts, tools & brakes. Powered by an ergonomic, high pressure trigger, the heavy duty cleaning agent instantly removes oil, dirt build up, varnish, sludge, grease, brake fluid, oil, gum and varnish. Drise ultra fast with no residue. Ideal for metal parts, tools, carburetors, air intakes, throttle bodies, brake drums, rotors & calipers. Brake pads or linings that have been damaged (impregnated) with oil or grease should be replaced, not cleaned. To help retard the release of asbestos dust and other airborne particulate matter, follow the directions for use carefully. Professional users must read the SDS before using this product. Call 704-821-7643 or go to www.gunk.com for SDS. Breaks Through Instantly: Cleans & degreases metal parts, tools & brakes. High pressure, ergonomic trigger reduces hand fatigue. Heavy duty cleaning agent. Ultra fast dry time. No residue. No chlorinated solvents. 50-State compliant. www.gunk.com. Call 704-821-7643 or go to www.gunk.com for SDS. No CFCs: Contains no CFCs which deplete the ozone layer. Made in USA.

Ingredients

Contains (Cas No.): Acetone (67-41-1), Heptanes (142-82-5), and Carbon Dioxide (124-38-9).

Directions

Directions: Always wear eye protection while using this product. Do not spray onto mass airflow sensors. They require cleaning with special solvents to ensure proper performance. Carburetors and Throttle Bodies - With engine off and cool, clean the outside and linkages. Start the engine and with the engine running - spray into and around throat to clean throttle plate area. Avoid spraying on plastic parts or electrical connections near or on the throttle body/air intake. Wipes excess spray off immediately if overspray occurs. Brakes - Turn off engine. Protect rubber or plastic brake parts, seals and painted surfaces from spray. Spray short bursts from a distance of 18-24 inches to wet parts. Continue spraying at a distance of 12-18 inches to flush contaminants from surface. Spray brake parts thoroughly and allow to aid dry or wipe with a soft clean cloth. If deposits are heavy repeat application. All Other Metal Parts - Spray and wipe or air dry. Will not harm catalytic converters and oxygen sensors. Do not spray on hot metal surfaces like exhaust pipes. Disposal: Dispose of product residue, rinsate, and empty container in accordance with all local, state and federal laws regulations. Empty aerosol cans are recyclable: consult your local recycling authority. Emptied containers contain product residue, so follow all warnings, even after container is emptied.

Storage & Handling: Fire and Explosion Hazard: Extremely Flammable: Use only in a well-ventilated area with a constant flow of fresh air, preferably outdoors. Keep away from heat, sparks, flame, or any other source of ignition. Pilot lights of furnaces, hot water tanks, or even static electricity can ignite vapors explosively. Do not use in confined spaces, enclosed garages, basements, or low lying areas where vapors can collect. Do not place can on hot surfaces or in direct sunlight which could cause can to burst violently. Keep can away from contact with electrical current or connections such as battery terminals because burn-through may occur. Explosion or flash fire from liquid or vapors may cause serious injury or death. Store in a dry, well-ventilated area below 120 degrees F (48 degrees C). Do not puncture, crush or incinerate (burn) can. Breathing & Contact Hazards: Do not breathe asbestos, dust particles, or vapors. Use Niosh-approved respirator. Use only in a well-ventilated area with a constant flow of fresh air, and open doors and windows to prevent vapor buildup. Inhaling concentrated vapors, intentionally or otherwise, can cause brain and permanent organ damage or can be fatal. Avoid contact with eyes, skin, or clothing. Repeated contact may dry and defeat the skin. Wear chemical-resistant goggles and solvent-proof gloves and apron. Remove contaminated clothing and wash before use. Remove contact lenses before use. Wash thoroughly after handling. May be harmful swallowed.

Warnings

Danger: Extremely flammable. Liquid and vapor may cause flash fire. Eye & skin irritant. Contents under pressure. Read precautions on back panel. Danger: Use only as directed. Do not swallow. Flammable. Fire and explosion hazard. First Aid: Eye Contact: Flush thoroughly with water 15 minutes while lifting eyelids occasionally and get prompt medical attention. Skin Contact: Wash with soap and water. If irritation persists, get prompt medical attention. Inhalation: Move to fresh air. If breathing becomes difficult, get prompt medical attention. Inhalation: Move to fresh air. If breathing becomes difficult, get prompt medical attention. Ingestion: Do not induce vomiting. Call Poison Control Center, physician, or hospital emergency room immediately. Keep away from children and animals.