Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
Gorilla Glue Epoxy, Clear
Gorilla Glue Epoxy, Clear
0.85 fl oz
100% satisfaction guarantee
Place your order with peace of mind.
About
Details
Incredibly strong. Sets in 5 min. For the toughest jobs on Planet Earth. Color: Dries clear. Bonded Strength: 3000 PSI. Indoor/Outdoor: Water resistant. Structural gap filler. Bonds: metal, wood, ceramic, glass, most plastic and more! Includes: Resealable cap, stir stick & mixing tray. Incredibly strong and fast setting. Easy, even dispensing. Low odor. Solvent resistant and non-toxic once cured. www.gorillatough.com. Made in USA.
Directions
Directions: If you're using Gorilla Epoxy for the first time, or bonding a new type of material, we always recommend trying a test piece first. 1. Prepare Your Work Area: Use in a well-ventilated area. Be sure your work area is protected from spills. A mixing tray and plastic stir stick are provided. To improve adhesion, roughen smooth surfaces before gluing. Clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove plastic stir stick from middle of plunger. With package pointing upward remove the closure from the two syringes. With the package still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. The package itself can be used as a mixing tray. If you flip the plastic blister shell over, you can use the small well as a starter dish to begin dispensing until both the resin and hardener are flowing equally. Once the flow is even, move to the larger mixing well to dispense your even ratio. Using plastic stir stick mix the two parts for about 20 seconds, until the mixture is uniform. Apply within 5 minutes. As you mix, you will notice that the epoxy warms up. This is a reaction that occurs as the resin and hardener combine. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken, and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. 5. Storage: To close, slightly pull back on plunger. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Set Time: 5 minutes to apply and position. Handling Time: 30 minutes undisturbed. Cure Time: 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times. Temp. Range: Bond withstands -10 degrees F to 180 degrees F. Cured Color: Dries clear (Heat or sun exposure can cause product to yellow). Storage: After use, clean syringe and replace clear cap. Store in a cool, dry place. Clean-Up: Remove excess glue immediately from project surface with dry cloth and acetone, mineral spirits or rubbing alcohol. See below for removal from skin.
Warnings
Harmful if swallowed, harmful by skin absorption. Eye & skin irritant. May produce allergic reaction by skin contact. Do not swallow. Do not get in eyes or skin or clothing. Do not breathe fumes. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Contains epoxy resin, polymercaptan, and amine curing agents. First Aid Treatment: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes or on skin, rinse well with water. If on clothes, remove clothes. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186.
Cancer and reproductive harm - www.p65warnings.ca.gov.
Heat or sun exposure can cause product of yellow.
Not recommended for use on polyethylene or polypropylene plastics.
Not recommended for below-waterline use.
Store away from children and animals.
About
Details
Incredibly strong. Sets in 5 min. For the toughest jobs on Planet Earth. Color: Dries clear. Bonded Strength: 3000 PSI. Indoor/Outdoor: Water resistant. Structural gap filler. Bonds: metal, wood, ceramic, glass, most plastic and more! Includes: Resealable cap, stir stick & mixing tray. Incredibly strong and fast setting. Easy, even dispensing. Low odor. Solvent resistant and non-toxic once cured. www.gorillatough.com. Made in USA.
Directions
Directions: If you're using Gorilla Epoxy for the first time, or bonding a new type of material, we always recommend trying a test piece first. 1. Prepare Your Work Area: Use in a well-ventilated area. Be sure your work area is protected from spills. A mixing tray and plastic stir stick are provided. To improve adhesion, roughen smooth surfaces before gluing. Clean and dry all surfaces to be bonded. 2. Mixing Gorilla Epoxy: Remove plastic stir stick from middle of plunger. With package pointing upward remove the closure from the two syringes. With the package still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. The package itself can be used as a mixing tray. If you flip the plastic blister shell over, you can use the small well as a starter dish to begin dispensing until both the resin and hardener are flowing equally. Once the flow is even, move to the larger mixing well to dispense your even ratio. Using plastic stir stick mix the two parts for about 20 seconds, until the mixture is uniform. Apply within 5 minutes. As you mix, you will notice that the epoxy warms up. This is a reaction that occurs as the resin and hardener combine. 3. Application: After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken, and the bond strength will decrease the longer you wait to apply. 4. Clamping: To reach maximum bond strength, clamp project together and leave undisturbed. 5. Storage: To close, slightly pull back on plunger. Wipe tip clean with dry cloth and align notch on tip and cap. Close tightly. Set Time: 5 minutes to apply and position. Handling Time: 30 minutes undisturbed. Cure Time: 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times. Temp. Range: Bond withstands -10 degrees F to 180 degrees F. Cured Color: Dries clear (Heat or sun exposure can cause product to yellow). Storage: After use, clean syringe and replace clear cap. Store in a cool, dry place. Clean-Up: Remove excess glue immediately from project surface with dry cloth and acetone, mineral spirits or rubbing alcohol. See below for removal from skin.
Warnings
Harmful if swallowed, harmful by skin absorption. Eye & skin irritant. May produce allergic reaction by skin contact. Do not swallow. Do not get in eyes or skin or clothing. Do not breathe fumes. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Contains epoxy resin, polymercaptan, and amine curing agents. First Aid Treatment: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes or on skin, rinse well with water. If on clothes, remove clothes. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186.
Cancer and reproductive harm - www.p65warnings.ca.gov.
Heat or sun exposure can cause product of yellow.
Not recommended for use on polyethylene or polypropylene plastics.
Not recommended for below-waterline use.
Store away from children and animals.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.