Details

Hannaford® Bathroom Cleaner.

Ingredients

Active Ingredients:

N-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) Dimethyl Benzyl Ammonium Chloride..0.1%.

N-Alkyl (68% C12,32% C14) Dimethyl Ethylbenzyl Ammonium Chloride.. 0.1%.

Other Ingredients..99.8%.

Total..100.0%.

Directions

It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Disinfection, Deodorization and cleaning: 1. shake can well before and during use. 2. Holding can 6 to 8 inches from surface, spray area until it is covered with a white foam. To disinfect, allow foam to penetrate and remain wet for 10 minutes. To only clean surface wipe foam away after 1 to 2 minutes. 3. Wipes with wet cloth or sponge. 4. For heavily soiled areas, remove heavy soil or gross filth before treatment. To sanitize: spray hard non-porous surfaces until entire area is thoroughly covered with a white foam. Allow foam to remain wet for 5 minutes before wiping. Remove heavy soil or gross filth prior to sanitization. Mold and Mildewstat – To control mold and mildew on pre-cleaned, hard, non-porous surfaces, spray surface until it is completely covered in foam. Let air dry. Repeat application at weekly intervals or when mildew growth reappears. This product is not to be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high level disinfection. Storage and disposal. Do not contaminate water, food or feed by storage or disposal. Pesticide storage: Store in a cool, dry area away from heat or open flame. Pesticide disposal: wastes resulting from the use of this product may be disposed of on site or at an approved waste disposal facility. Container disposal: non-refillable container; do not reuse or refill this container. Do not puncture or incinerate! If empty: place in trash or offer for recycling if available. This container may be recycled in the few but growing numbers of communities, where (steel) aerosol can recycling is available. Before offering for recycling, empty the can by using the product according to the label. Do not puncture! If recycling is not available, discard container in trash. If partly filled: call your local solid waste agency for disposal instructions.

Warnings

Keep out of reach of children. Precautionary statements. Hazards to humans & domestic animals. Caution: Harmful if swallowed or absorbed through skin. Causes moderate eye irritation. Avoid contact with the eyes, skin or clothing. Thoroughly was with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet. First aid. If swallowed: Immediately call a poison control center or doctor for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do so by the poison control center or doctor. Do not give anything by mouth to an unconscious person. If on skin or clothing. Take off contaminated clothing. Immediately rinse skin with plenty of water for 15-20 minutes. Call a poison control center or doctor for treatment advice. If in eyes: Hold eye open and rinse slowly and gently with water for 15-20 minutes. Remove contact lenses, if present, after the first 2 minutes, then continue rinsing eye. Call a poison control center or doctor for treatment advice. Have the product container or label with you when calling a poison control center or doctor or going for treatment. Physical or chemical hazards. Content under pressure. Do not use or store near heat or open flame. Do not puncture or incinerate container. Exposure to temperatures above 120°F may cause bursting.