Non-slip and self-stick. Waterproof & mildew resistant. For tubs, stairs, railings, ladders, stools, laundry room and bathroom. Every Enablers product is designed by a team of professionals. This product was designed in consultation with occupational therapists to assure that it does what it is designed to do - with your needs as out primary concern. Engineers use state-of-the-art manufacturing methods so this product is ergonomic, comfortable, inexpensive and easy to use. Designers styled this product to look good, both in your home and when in use. Made in USA.
Surface Preparation: For porcelain, cast-iron or steel tubs, clean surface with warm water and scouring powder. For fiberglass, ABS and other plastic tubs, clean surface according to tub manufacturer's instructions. Important: Do not use liquid or aerosol cleaners to prepare tub. Thoroughly rinse tub surface. Wipe dry. Use household rubbing alcohol to remove all cleaning residue and allow to air dry 30 minutes. Surface must be smooth, completely dry, and above 50 degrees F. Note: Do not apply over uneven surfaces or bridging gaps. Application: With paper backing in place, arrange treads in desired pattern. Remove backing from one piece at a time, taking care not to touch adhesive. Press tread firmly from middle outward, to ensure solid contact with surface. We suggest going all over pieces with a rolling pin. All outer edges should be in contact with tub surface. Allow adhesive to dry for 12 hours before using tub or shower. Cleaning: Clean strips with non-abrasive, mild detergent. When using bath oil, pour oil into filled tub rather than directly on treads.
Non-slip and self-stick. Waterproof & mildew resistant. For tubs, stairs, railings, ladders, stools, laundry room and bathroom. Every Enablers product is designed by a team of professionals. This product was designed in consultation with occupational therapists to assure that it does what it is designed to do - with your needs as out primary concern. Engineers use state-of-the-art manufacturing methods so this product is ergonomic, comfortable, inexpensive and easy to use. Designers styled this product to look good, both in your home and when in use. Made in USA.
Surface Preparation: For porcelain, cast-iron or steel tubs, clean surface with warm water and scouring powder. For fiberglass, ABS and other plastic tubs, clean surface according to tub manufacturer's instructions. Important: Do not use liquid or aerosol cleaners to prepare tub. Thoroughly rinse tub surface. Wipe dry. Use household rubbing alcohol to remove all cleaning residue and allow to air dry 30 minutes. Surface must be smooth, completely dry, and above 50 degrees F. Note: Do not apply over uneven surfaces or bridging gaps. Application: With paper backing in place, arrange treads in desired pattern. Remove backing from one piece at a time, taking care not to touch adhesive. Press tread firmly from middle outward, to ensure solid contact with surface. We suggest going all over pieces with a rolling pin. All outer edges should be in contact with tub surface. Allow adhesive to dry for 12 hours before using tub or shower. Cleaning: Clean strips with non-abrasive, mild detergent. When using bath oil, pour oil into filled tub rather than directly on treads.