1 in x 60 in (1.66 yds). Holds Up To 5 lbs. Item No. 4011. Use exterior or interior; Industrial quality adhesive; Weather resistant. Fastens securely. Conformable. Can be used on textured surfaces such as painted cement or brick.
1. Make light pencil lines on wall at key points around object to be mounted. 2. Cut lengths needed from roll. Do not remove protective red liner as yet. 3. Press tape into position on back of object to be mounted. Press firmly on red liner for good adhesive contact. 4. Remove red liner and press firmly into place on wall. If you wish to remove mounted object, insert knife behind mounted object and cut tape between adhesive surfaces. Remove remaining material from wall with thumbnail. Be careful not to mar wall's surface. Use same procedure when removing remaining material from detached object.
Note: This is a permanent tape that may cause damage if removed. If you must remove the mounted object, use a piece of dental floss or wire, held tautly between two hands. Pull back and forth, to split the tape, and release the mounted object. *Not recommended for use on wallpaper or delicate surfaces.
1 in x 60 in (1.66 yds). Holds Up To 5 lbs. Item No. 4011. Use exterior or interior; Industrial quality adhesive; Weather resistant. Fastens securely. Conformable. Can be used on textured surfaces such as painted cement or brick.
1. Make light pencil lines on wall at key points around object to be mounted. 2. Cut lengths needed from roll. Do not remove protective red liner as yet. 3. Press tape into position on back of object to be mounted. Press firmly on red liner for good adhesive contact. 4. Remove red liner and press firmly into place on wall. If you wish to remove mounted object, insert knife behind mounted object and cut tape between adhesive surfaces. Remove remaining material from wall with thumbnail. Be careful not to mar wall's surface. Use same procedure when removing remaining material from detached object.
Note: This is a permanent tape that may cause damage if removed. If you must remove the mounted object, use a piece of dental floss or wire, held tautly between two hands. Pull back and forth, to split the tape, and release the mounted object. *Not recommended for use on wallpaper or delicate surfaces.