White Colors: Cleaner, fresher, brighter, whieter. Add to every load. Safe for all colors. Top Loader: Fill washer with water. Add OxiClean and detergent before adding laundry. Fill to line A for regular loads, or more for large or heavily soiled loads. HE Washer (Do not mix OxiClean with detergent in the dispenser. Read your HE owner's manual for instructions): Add OxiClean to washer before adding laundry. Tablecloths Uniforms: Tough stains and odors. Mix until completely dissolved. Use warm or hot water. Do not heat or boil. Do not mix/store solution in a sealed container. Soak for best results. 1. Mix: Use a full scoop per gallon of water. Submerge items in solution after dissolved. 2. Soak 3-6 hours. Depending on severity of stains or odors, some items may require more time to soak. 3. Wash as normal with detergent and OxiClean. Upholstery: Soft Surface Stains. Mix until completely dissolved. Use warm or hot water. Do not heat or boil. Do not mix/store solution in a sealed container. Use only on water-washable upholstery and rugs. Mix: Fill to line A per 16 ounces of water. Remove excess stains before treating. For Carpet: Apply only enough solution to saturate stain. Allow solution to stand 1-5 minutes. Do not allow solution to dry on fabrics. Blot with white towel Repeat until stain is not visible. Rinse carpet with clean water and blot until dry. For Upholstery: Do not apply solution directly on stain. Apply with clean white towel and use towel to blot out stain. Repeat until stain is not visible. Then, dampen a clean white towel with water and blot area to rinse. Grout Patio: Hard surface. Mix until completely dissolved. Use warm or hot water. Do not heat or boil. Do not mix/store solution in a sealed container. 1. Mix use a full scoop per gallon of water. Note: For some surfaces, like grout, a more concentrated solution/paste may be used. 2. Apply using a cloth, sponge, brush, or by pouring solution directly onto surface. 3. Let stand 15-30 min. Scrub as needed. For large surfaces, work with small areas, so solution does not dry on the surface. 4. Rinse well with cool water. Read Before Use: 1. Always test OxiClean on an inconspicuous area first. Rinse, allow to dry. Safe on colorfast fabrics only. 2. Do not use on wool, blends, silk, silk blends, leather or on fabrics labeled dry clean only. Not for use on jewelry, latex paints, woven baskets, unpainted wicker, jute, teak, or finished woods. Metals must not be soaked and must be rinsed immediately and thoroughly. Not for use on rust, dried pain, or bleach damage. Safe for septic tanks. 3. Follow manufacturer's instructions for water temperature and for cleaning garment or item. For Best Results: 1. Launder in the warmest water recommended by the garment care label. If washing in cold water, first dissolbe in 16 oz of water to hot water. Add to cold water. 2. Presoak for 3-6 hours to remove rough stains and odors.