Directions

Important: Directions for Use: Step 1: Insert bait in bait compartment. 1. Baiting: On the bottom of the trap, peel back the small self-adhesive label. Apply bait (cheese or peanut butter) to the bait compartment Reseal self-adhesive label over compartment, and turn trap over (label up). Step 2: Twist and set trap: 2. Setting: While holding base of trap in a horizontal position, twist top cover in a clockwise rotation (in direction of arrow) until it locks. A red indicator will show through the hole marked Set on the top of the trap. A mouse entryway will open in front. Step 3: Place trap in high traffic mouse area. 3. Placement: Gently place set trap (label up) on hard surface near wall, or in areas where mice are active. For best results, place two or more d-Con Traps 4-6 feet apart where you see or suspect mice. Step 4: When Mouse caught is indicated, properly dispose of trap. 4. Disposal: Check trap frequently. When mouse entryway is dosed and red indicator shows though the hole marked Mouse Caught, dispose of entire trap. Note: If trap is accidentally triggered, a red indicator will show at the Not Set position. Repeat the instructions at Step 2 (Setting) if this occurs.