Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
Thermos Hydration Bottle
Thermos Hydration Bottle
1 ct
100% satisfaction guarantee
Place your order with peace of mind.
About
Details
Thermos® Hydration Bottle.
Directions
EN General Care. Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry. Contacts should not be left in the container for longer than 24 hours. As soon as possible after each and every use, wash all parts with warm, soapy water. Rinse at parts thoroughly with clean water. Allow all parts to dry completely prior to next use or storage. Do not use abrasive cleaners or scrubbers since they may dull the finish. Do not use bleach or cleaners containing chlorine on any parts of the product. This product top-rack dishwasher safe; however, hand washing recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product. Residual liquids foods, or otter contents may become trapped between product components, such as lid parts, container parts, gaskets (flexible band around lid and/or stopper), or straws (if present in the product) Although this product is top-rack dishwasher safe, hand washing is recommended to ensure that these parts of the product are thoroughly cleaned. Assembly & Use. Hard Spout Lid (if present): 1 Remove lid (A) by twisting counterclockwise. 2. Pull down the locking-ring (B) (if present) located on Iid (A). Press the push-button (D) on the lid (A) to open lid cover (C). 3. Pull out spout gasket (C1) from underside of lid cover (C) to completely remove it. 4. Remove o-ring gasket (A1) from underside of led (A). 5. Wash all parts separately and re-assemble. a. Ensure gaskets. (A1 and C1) are properly seated to minimize leaking. 6. Fill container with contents. Do not overfill: leave space for lid (A) to avoid overflow. 7. Replace the lid (A) by twisting it clockwise. 8. To drink, pull down the locking-ring (B) (if present) located on lid (A) Push the push-button (D) located on the lid (A), which will release the lid cover (C) and reveal the drink opening. 9 When finished drinking, close and lock the id cover (C) by Securing the locking-ring (B) (if present) over the push-button (D). See warnings Section below for further details. Soft Spout Lid (If Present): 1 Remove led (E) by *twisting counterclockwise. 2. Pull down the locking-ring (F) located on lid (E). Press the Push-button (G) on the lid (E) to open lid cover (H). 3. Pull out soft spout gasket (E1) by pulling from the top of (E1) through the top of lid (E) to completely remove it. 4. Wash all parts separately and re-assemble. a. Fold flat portion of soft spout gasket (E1) in half and feed through the top of the lid (E). b. Ensure gasket (E1) is property seated to minimize leaking. 5. Fill container with contents. Do not overfill: Leave space for lid (E) to avoid overflow. 6. Replace the lid (E) by twisting it clockwise. 7. To drink, pi dawn the locking ring (F) located on lid (E). Push the push-button (G) located on the lid (E), which will release the lid cover (H) and reveal the drink opening. 8. When finished drinking, close and lock the lid cover (H) by securing the locking-ring (F) over the push-button (G). See warnings Section below for future details. Flip-up Straw Lid (if Present). 1. Remove lid (I) by twisting counterclockwise. 2. Pull on the straw tab (J1) on the sipper straw (J) to open. 3. Put the straw stem (K) out of bottom of the lid. 4. Wash all parts separately and re-assemble. 5. Fill container with contents. Do not overfill: Leave space for the lid (I) and straw stern (K), to avoid overflow. 6. Replace lid (I) by twisting clockwise. 7. To drink, pull on the straw tab (J1) on the sipper straw (J) to open. 8. When finished drinking, Press the sipper straw (J) down to closed position. See warnings Section below for further details. Flip-top lid (if Present): 1. Remove lid (L) by twisting counterclockwise. 2. Flip up the lid cover (M) until locked in the open, position as shown in diagram. 3. Pull out spout gasket (M1) from underside of lid cover (M) to completely remove it. 4. Wash all parts separately and re-assemble. a. Ensure the spout gasket (M1) is completely positioned on the underside of lid. 5. Fill container with contents. Do not overfill: leave space for lid (L) to avoid overflow. 6. Replace the lid (L) twisting it clockwise. 7. To drink, flip up the lid cover (M) until locked in the open position as shown in diagram. 8. When finished drinking flip the lid cover (M) in the opposite direction to cover the drink opening. Ensure that the lid cover (M) is pressed until tightly closed.
Warnings
Do not use product in microwave, on stove top, or in any type of oven. Not for use with hot liquids: For cold liquids only, hot liquids may burn or scald user. Always test temperature of contents before consuming. Do not overfill the container: Leave space at top of container for lid, straw (if present) and stopper (if present), to avoid overflow. Check periodically to make sure any gasket (flexible band around lid and /or stopper is present and properly positioned to prevent contents from passing through lid when lid is closed (if applicable to product) missing, worm or misaligned gasket may cause product to leak, Leakage of hot contents may burn or scald user. In general, contents should not be left in container for longer than 24 hour. However. The rate at which contents spoil. depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner. Proceed with caution when using the product with quick spoiling contents. If contents are left in container longer than 24 hours, or you suspect spoilage, use caution when opening container, Contents spoilage can cause pressure inside container to build, possibly leading to forceful ejection of stopper or contents. In such circumstances, before attempting to open container, Ensure the opening is pointed away from the user or other persons to avoid injury. Do not use tools or devices to force container to open. If you are unable to open container by hand, do not open it and dispose of it at your local waste facility. Do not use to store or carry carbonated drinks or dry ice. This may case lid/stopper and contents to eject forcefully or leak.
About
Details
Thermos® Hydration Bottle.
Directions
EN General Care. Before first use, wash all parts with warm, soapy water. Rinse all parts thoroughly and allow time to dry. Contacts should not be left in the container for longer than 24 hours. As soon as possible after each and every use, wash all parts with warm, soapy water. Rinse at parts thoroughly with clean water. Allow all parts to dry completely prior to next use or storage. Do not use abrasive cleaners or scrubbers since they may dull the finish. Do not use bleach or cleaners containing chlorine on any parts of the product. This product top-rack dishwasher safe; however, hand washing recommended as the dishwasher uses harsher detergents and hot water that may affect the appearance of your product. Residual liquids foods, or otter contents may become trapped between product components, such as lid parts, container parts, gaskets (flexible band around lid and/or stopper), or straws (if present in the product) Although this product is top-rack dishwasher safe, hand washing is recommended to ensure that these parts of the product are thoroughly cleaned. Assembly & Use. Hard Spout Lid (if present): 1 Remove lid (A) by twisting counterclockwise. 2. Pull down the locking-ring (B) (if present) located on Iid (A). Press the push-button (D) on the lid (A) to open lid cover (C). 3. Pull out spout gasket (C1) from underside of lid cover (C) to completely remove it. 4. Remove o-ring gasket (A1) from underside of led (A). 5. Wash all parts separately and re-assemble. a. Ensure gaskets. (A1 and C1) are properly seated to minimize leaking. 6. Fill container with contents. Do not overfill: leave space for lid (A) to avoid overflow. 7. Replace the lid (A) by twisting it clockwise. 8. To drink, pull down the locking-ring (B) (if present) located on lid (A) Push the push-button (D) located on the lid (A), which will release the lid cover (C) and reveal the drink opening. 9 When finished drinking, close and lock the id cover (C) by Securing the locking-ring (B) (if present) over the push-button (D). See warnings Section below for further details. Soft Spout Lid (If Present): 1 Remove led (E) by *twisting counterclockwise. 2. Pull down the locking-ring (F) located on lid (E). Press the Push-button (G) on the lid (E) to open lid cover (H). 3. Pull out soft spout gasket (E1) by pulling from the top of (E1) through the top of lid (E) to completely remove it. 4. Wash all parts separately and re-assemble. a. Fold flat portion of soft spout gasket (E1) in half and feed through the top of the lid (E). b. Ensure gasket (E1) is property seated to minimize leaking. 5. Fill container with contents. Do not overfill: Leave space for lid (E) to avoid overflow. 6. Replace the lid (E) by twisting it clockwise. 7. To drink, pi dawn the locking ring (F) located on lid (E). Push the push-button (G) located on the lid (E), which will release the lid cover (H) and reveal the drink opening. 8. When finished drinking, close and lock the lid cover (H) by securing the locking-ring (F) over the push-button (G). See warnings Section below for future details. Flip-up Straw Lid (if Present). 1. Remove lid (I) by twisting counterclockwise. 2. Pull on the straw tab (J1) on the sipper straw (J) to open. 3. Put the straw stem (K) out of bottom of the lid. 4. Wash all parts separately and re-assemble. 5. Fill container with contents. Do not overfill: Leave space for the lid (I) and straw stern (K), to avoid overflow. 6. Replace lid (I) by twisting clockwise. 7. To drink, pull on the straw tab (J1) on the sipper straw (J) to open. 8. When finished drinking, Press the sipper straw (J) down to closed position. See warnings Section below for further details. Flip-top lid (if Present): 1. Remove lid (L) by twisting counterclockwise. 2. Flip up the lid cover (M) until locked in the open, position as shown in diagram. 3. Pull out spout gasket (M1) from underside of lid cover (M) to completely remove it. 4. Wash all parts separately and re-assemble. a. Ensure the spout gasket (M1) is completely positioned on the underside of lid. 5. Fill container with contents. Do not overfill: leave space for lid (L) to avoid overflow. 6. Replace the lid (L) twisting it clockwise. 7. To drink, flip up the lid cover (M) until locked in the open position as shown in diagram. 8. When finished drinking flip the lid cover (M) in the opposite direction to cover the drink opening. Ensure that the lid cover (M) is pressed until tightly closed.
Warnings
Do not use product in microwave, on stove top, or in any type of oven. Not for use with hot liquids: For cold liquids only, hot liquids may burn or scald user. Always test temperature of contents before consuming. Do not overfill the container: Leave space at top of container for lid, straw (if present) and stopper (if present), to avoid overflow. Check periodically to make sure any gasket (flexible band around lid and /or stopper is present and properly positioned to prevent contents from passing through lid when lid is closed (if applicable to product) missing, worm or misaligned gasket may cause product to leak, Leakage of hot contents may burn or scald user. In general, contents should not be left in container for longer than 24 hour. However. The rate at which contents spoil. depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner. Proceed with caution when using the product with quick spoiling contents. If contents are left in container longer than 24 hours, or you suspect spoilage, use caution when opening container, Contents spoilage can cause pressure inside container to build, possibly leading to forceful ejection of stopper or contents. In such circumstances, before attempting to open container, Ensure the opening is pointed away from the user or other persons to avoid injury. Do not use tools or devices to force container to open. If you are unable to open container by hand, do not open it and dispose of it at your local waste facility. Do not use to store or carry carbonated drinks or dry ice. This may case lid/stopper and contents to eject forcefully or leak.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.