Get in as fast as 1 hour
Shop your favorites
Connect with shoppers
100% satisfaction guarantee
Place your order with peace of mind.
May 2023
Customer since 2023
Woodbridge, VA
May 2023
Customer since 2015
Alexandria, VA
May 2023
Customer since 2021
Falls Church, VA
Holds 16 lb (7.2 kg). Up to 24 in x 36 in (60 cm x 90 cm). Damage-free hanging. Holds strongly. Removes cleanly. command.com. Made in USA with globally sourced materials.
1. Click. 2. Stick. 3. Press. Apply: 1. Clean wall with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Press two strips together until they click. Each pair of strips holds 4 lb. 3. Remove one side of liners. Place each pair of strips as shown. Press firmly. 4. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec. 5. To ensure adhesive hold, grab bottom corners and peel frame from wall. Do not pull straight off. Press each strip firmly for 30 seconds. 6. Wait 1 hour to reattach frame. Line up frame with strips on wall and press until each pair of strips click. Remove: 1. Grab bottom corners and peel frame from wall. Do not pull straight off. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch each strip slowly against the wall at least 15 inches.
Important: Failure to follow instructions carefully may cause damage! Caution: Do not use with wallpaper. May not adhere well to vinyl surfaces. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang items over beds. Note: apply to surfaces above 50 degrees F. Adhesive could lose adhesion above 105 degrees F.
Holds 16 lb (7.2 kg). Up to 24 in x 36 in (60 cm x 90 cm). Damage-free hanging. Holds strongly. Removes cleanly. command.com. Made in USA with globally sourced materials.
1. Click. 2. Stick. 3. Press. Apply: 1. Clean wall with rubbing alcohol. Do not use household cleaners. 2. Separate strips. Press two strips together until they click. Each pair of strips holds 4 lb. 3. Remove one side of liners. Place each pair of strips as shown. Press firmly. 4. Remove remaining liners and press frame on wall. Press each side firmly for 30 sec. 5. To ensure adhesive hold, grab bottom corners and peel frame from wall. Do not pull straight off. Press each strip firmly for 30 seconds. 6. Wait 1 hour to reattach frame. Line up frame with strips on wall and press until each pair of strips click. Remove: 1. Grab bottom corners and peel frame from wall. Do not pull straight off. 2. Never pull the strip towards you! Always pull straight down. 3. Stretch each strip slowly against the wall at least 15 inches.
Important: Failure to follow instructions carefully may cause damage! Caution: Do not use with wallpaper. May not adhere well to vinyl surfaces. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang items over beds. Note: apply to surfaces above 50 degrees F. Adhesive could lose adhesion above 105 degrees F.