Details

Ready to use disinfectant and sanitizer for hard non-porous surfaces. For commercial and household use. Contains 338 ppm FAC. Disinfection Claims: Kills bacteria (Staphylococcus aureus (ATCC 6538), pseudomonas aeruginosa (ATCC 15442), and salmonella enterica (ATCC 10708), escherichia coli (ATCC 11229)) on hard non-porous surfaces in 10 minutes. Kills staphylococcus aureus, pseudomonas aeruginosa, and salmonella enterica on treated surfaces. Organism Name (ATCC Numbers and/or strains): Staphylococcus aureus (ATCC 6538); Pseudomonas aeruginosa (ATCC 15442); Salmonella enterica (ATCC 10708); Escherichia coli (ATCC 1122(); H1 N1 A/Swine/1976/31 (ATCC VR-99); Norovirus (Feline calicivirus and murine norovirus as surrogates), feline calicivirus, strain F9 (ATCC VR-782); Murine norovirus, strain G (ATCC TIB-71); Carbapenem resistant klebsiella (CRE) pneumoniae (ATCC BAA-2470); Hepatitis A (Stain: HM 175/18F. Source: University of Ottawa); Hepatitis B (Stains: Grimaud. Source: Hepadnavirus testing); Hepatitis C (Strain: NADL. Source: American Biosearch Laboratories); HIV1 (Strain: IIIB. Source: ZeptoMetrix). Note: ATCC numbers are not available for hepatitis A, hepatitis B, hepatitis C, HIV1. Equivalent identifiers are used in above table accordingly. Sanitization Claims: Kills E. coli and S. aureus on treated food contact surfaces in 60 seconds. Kill escherichia coli and staphylococcus aureus on treated surfaces in 60 seconds. Non-corrosive. No dilution or mixing required. OMRI listed for organic use. Torch Management Services, Inc. endorsed partner. Warranty: Envirocleanse-A warrants that this product conforms to the productions specification on this label and is reasonable fit for the purposes set forth in the directions for use. To the extent consistent with applicable law. No other express warranty or implied warranty of fitness for particular purpose or merchantability is made. www.environcleanse.us.

Ingredients

Active Ingredients: Hypochlorous Acid (0,025%), Other Ingredients: (99,975%), Total (100.00%).

Directions

Directions for Use: It is a violation of federal law to use this product in a manner inconsistent with its labeling. Envirocleanse A is a disinfectant for use on hard non-porous inanimate surfaces. Envirocleanse A is an oxidized, pH-neutral water based solution that is ready-to-use. When used accordingly to directions for use, this product disinfects hard, non-porous surfaces. Disinfection of Hard, Non-porous Surfaces: Envirocleanse A can be used to disinfect hard, non-porous surfaces. To disinfect, apply Envirocleanse A to any hard, non-porous surface with a cloth, mop, sponge or coarse sprayer. Wet the surfaces thoroughly and allow surface to remain wet for 10 minutes. Allow treated surface to air dry. Remove visible soil filth from surfaces before applying this product. Small non-porous objects can also be soaked in Envirocleanse A without dilution. Allow objects to soak for 10 minutes. This product Is not lo be used as a terminal sterilant/high level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in direct contact with the bloodstream or normally sterile areas of body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used so pre-clean decontaminate critical or semi-critical devices prior to sterilization or high level disinfection. Sanitation of Hard Non-porous Food Contact Surfaces: Envirocleanse A is an effective sanitizer against gram positive and gram negative bacteria (vegetative forms) such as staphylococcus aureus and escherichia coli. Envirocleanse A is a sanitizer for use on pre-cleaned non-porous, food contact surfaces including food preparation and storage areas. Prior to application, preclean all surfaces by a pre-flush or pre-scrape and when necessary, presoak. Then thoroughly wash or flush objects with a good detergent or compatible cleaner, followed by a portable water rinse before applications of the sanitizing solution. To sanitizer, apply Envirocleanse A to any hard, non-porous surface with a cloth, mop, sponge or coarse sprayer. Wet the surface thoroughly and allow surface to remain wet for 60 seconds. Allow treated surface to air dry. Remove gross filth from surfaces before applying this product.

Storage and Disposal: Do not contaminate water, food, or feed by storage and disposal, or cleaning of equipment. Pesticide Storage: Store Envirocleanse A in its original sealed container at room temperature away from direct sunlight and heat to avoid deterioration. Pesticide Disposal: Wastes from the use of this product may be disposed of on site or at an approved waste disposal facility. Container Handling: Nonrefillable container. Do not reuse or refill this container. (Then) offer for recycling if available or reconditioning if appropriate puncture and dispose of in a sanitary landfill or by incineration.

Warnings

Caution: Keep out of reach of children. If the product is not used immediately after production, the product should be tested with a chlorine test kit. The product should contain 338 ppm FAC. Do not use product if less than 338 ppm of available chlorine. Physical or Chemical Hazards: Do not use this product with other household or industrial chemicals such as toilet bowl cleaners, rust removers, acids, or products containing ammonia. To do so will release hazardous, irritating gas. Prolonged contact with metal may cause pitting or discoloration.