Get in as fast as 1 hour
Shop your favorites
Connect with shoppers
100% satisfaction guarantee
Place your order with peace of mind.
May 2023
Customer since 2023
Woodbridge, VA
May 2023
Customer since 2015
Alexandria, VA
May 2023
Customer since 2021
Falls Church, VA
Use on: All hardwood floors. Use every 1-2 years on high traffic floors. Other Supplies Needed: 2 Rejuvenate Microfiber Bonnets; Rejuvenate Floor Cleaner; Sponge Mop. Always test on an inconspicuous area first. 1. Clean Floors Thoroughly: First, sweep or vacuum floor to remove all loose dirt, hair, etc. Next, clean floor thoroughly with Rejuvenate Floor Cleaner. Follow product directions. Allow floors to dry thoroughly. 2. Prep: Put a dean dry Rejuvenate Microfiber Bonnet on head of sponge mop to create a microfiber applicator. Do not use string, cotton or sponge mops to apply, as this may cause an uneven finish and hazy film. Gently rock this bottle back and forth 3 - 4 times to mix. Note: Do not shake. 3. Apply: working in small 5 ft. x 5 ft. Sections according to the chart to the left, start with section 1, and pour Rejuvenate onto floor in an S pattern and spread evenly with Rejuvenate Microfiber Bonnet on mop head in the direction of the grain/planks. Move onto next section sequentially until room is complete. 4. Let Dry: Allow 1-hour to dry before walking on the floor. A 2nd coat may be applied after 2-hours. Multiple coats create a higher-gloss shine. For best results, coat entire floor evenly. Uneven or thin coats may cause streaks. Allow final coat to dry 24-hours before replacing furniture, rugs, resuming heavy foot or pet-traffic. Storage: Keep in cool dry place out of direct sunlight. Store between 40 - 90 degrees F.
Keep out of reach of children. Caution: See back panel. Caution: Read all instructions before use. Floors treated with acrylic based coating must be thoroughly stripped. Follow stripping instructions provided for that product. Prepping surfaces correctly is critical. Use on unwaxed, polyurethane-finished wood floors only. Product is strippable within the first 48hrs. of applying. Restorer will not adhere to waxed or oiled apply floors. Clean floors thoroughly prior to use. Not to be used as a cleaner. Do not mix with other products. Caution: Keep out of reach of children. Do not mix with any other product. Sensitive individuals should wear gloves. Do not allow product to freeze. Do not apply any other product or strong detergent over this product. First Aid: Eye irritant. Avoid contact with eyes. If eye contact occurs, flush with water for at least 15 minutes and call a physician. This product contains polymer and solvent. Do not ingest. Ingestion may cause nausea, vomiting, diarrhea and mucosal irritation. If this should occur, drink large volumes of water and seek medical attention. Note: Not for use on laminate floors. Caution: Read all instructions before use. Floors treated with acrylic based coating must be thoroughly stripped. Follow stripping instructions provided for that product. Prepping surfaces correctly is critical. Use on unwaxed, polyurethane-finished wood floors only. Product is strippable within the first 48hrs. of applying. Restorer will not adhere to waxed or oiled apply floors. Clean floors thoroughly prior to use. Not to be used as a cleaner. Do not mix with other products. Other Supplies Needed: 2 Rejuvenate Microfiber Bonnets; Rejuvenate Floor Cleaner; Sponge Mop.
Use on: All hardwood floors. Use every 1-2 years on high traffic floors. Other Supplies Needed: 2 Rejuvenate Microfiber Bonnets; Rejuvenate Floor Cleaner; Sponge Mop. Always test on an inconspicuous area first. 1. Clean Floors Thoroughly: First, sweep or vacuum floor to remove all loose dirt, hair, etc. Next, clean floor thoroughly with Rejuvenate Floor Cleaner. Follow product directions. Allow floors to dry thoroughly. 2. Prep: Put a dean dry Rejuvenate Microfiber Bonnet on head of sponge mop to create a microfiber applicator. Do not use string, cotton or sponge mops to apply, as this may cause an uneven finish and hazy film. Gently rock this bottle back and forth 3 - 4 times to mix. Note: Do not shake. 3. Apply: working in small 5 ft. x 5 ft. Sections according to the chart to the left, start with section 1, and pour Rejuvenate onto floor in an S pattern and spread evenly with Rejuvenate Microfiber Bonnet on mop head in the direction of the grain/planks. Move onto next section sequentially until room is complete. 4. Let Dry: Allow 1-hour to dry before walking on the floor. A 2nd coat may be applied after 2-hours. Multiple coats create a higher-gloss shine. For best results, coat entire floor evenly. Uneven or thin coats may cause streaks. Allow final coat to dry 24-hours before replacing furniture, rugs, resuming heavy foot or pet-traffic. Storage: Keep in cool dry place out of direct sunlight. Store between 40 - 90 degrees F.
Keep out of reach of children. Caution: See back panel. Caution: Read all instructions before use. Floors treated with acrylic based coating must be thoroughly stripped. Follow stripping instructions provided for that product. Prepping surfaces correctly is critical. Use on unwaxed, polyurethane-finished wood floors only. Product is strippable within the first 48hrs. of applying. Restorer will not adhere to waxed or oiled apply floors. Clean floors thoroughly prior to use. Not to be used as a cleaner. Do not mix with other products. Caution: Keep out of reach of children. Do not mix with any other product. Sensitive individuals should wear gloves. Do not allow product to freeze. Do not apply any other product or strong detergent over this product. First Aid: Eye irritant. Avoid contact with eyes. If eye contact occurs, flush with water for at least 15 minutes and call a physician. This product contains polymer and solvent. Do not ingest. Ingestion may cause nausea, vomiting, diarrhea and mucosal irritation. If this should occur, drink large volumes of water and seek medical attention. Note: Not for use on laminate floors. Caution: Read all instructions before use. Floors treated with acrylic based coating must be thoroughly stripped. Follow stripping instructions provided for that product. Prepping surfaces correctly is critical. Use on unwaxed, polyurethane-finished wood floors only. Product is strippable within the first 48hrs. of applying. Restorer will not adhere to waxed or oiled apply floors. Clean floors thoroughly prior to use. Not to be used as a cleaner. Do not mix with other products. Other Supplies Needed: 2 Rejuvenate Microfiber Bonnets; Rejuvenate Floor Cleaner; Sponge Mop.