Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
3x stronger than blues. Hand tool removable. 1/4 inches - 1 inch (6.4 -2.6 mm). Prevents vibration loosening. Permatex high strength removable orange threadlocker is a hybrid formula that combines the strength of red threadlocker with the removability of blue threadlocker. Orange threadlocker is ideal for modern day engine bays with a great deal of lightweight components and high vibration applications. unlike traditional red threadlocker, orange threadlocker can be removed with hand tools when extra force is applied.
Directions
Automotive/Industrial Uses: Case half bolts, triple tree fasteners, flywheel bolts, stator bolts, axle nuts, transmission mounting bolts, dirt bikes, manufacturing machinery, and heavy-duty construction. Hardware Uses: General repair and maintenance, power tools, lawn and garden tools. Break Strength: 3/8 inches plain nut and bolt 150-200 in lb. 3/8 inches zinc plated nut and bolt 80-120 in lb. Shear strength: N/A. Temp Range: 60 degrees F to 300 degrees F. Full care: 24 hours. Permatex threadlockers fixture in approximately 20 minutes and fully cured within 24 hours. permatex surface prep activator reduces fixture time to 5 minutes. Preceding values are for 3/8 inches - 16 steel as received nuts and bolts at 72 degrees F (22 degrees C). 1. Clean and dry parts using Permatex surface prep activator. 2. Shake threadlocker before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and assemble parts. Refer to technical data sheet for complete information. Note: Threadlocker is for use on active metal parts and is not to be used on plastics.
Warnings
Precautionary Statements—Prevention: Contains dimethyl hydroperoxide, cumene. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fumes/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash face, hands and any exposed skin thoroughly after handling. WarningCauses skin irritation. Causes serious eye irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. Precautionary Statements—Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on Skin: Wash with plenty of soap and water. if skin irritation or rash occurs: get medical advice/attention. Wash contaminated clothing before reuse. Keep out of the reach of children. Note: Threadlocker is for use on metal parts and is not to be used on plastics.Causes skin irritation.
About
Details
3x stronger than blues. Hand tool removable. 1/4 inches - 1 inch (6.4 -2.6 mm). Prevents vibration loosening. Permatex high strength removable orange threadlocker is a hybrid formula that combines the strength of red threadlocker with the removability of blue threadlocker. Orange threadlocker is ideal for modern day engine bays with a great deal of lightweight components and high vibration applications. unlike traditional red threadlocker, orange threadlocker can be removed with hand tools when extra force is applied.
Directions
Automotive/Industrial Uses: Case half bolts, triple tree fasteners, flywheel bolts, stator bolts, axle nuts, transmission mounting bolts, dirt bikes, manufacturing machinery, and heavy-duty construction. Hardware Uses: General repair and maintenance, power tools, lawn and garden tools. Break Strength: 3/8 inches plain nut and bolt 150-200 in lb. 3/8 inches zinc plated nut and bolt 80-120 in lb. Shear strength: N/A. Temp Range: 60 degrees F to 300 degrees F. Full care: 24 hours. Permatex threadlockers fixture in approximately 20 minutes and fully cured within 24 hours. permatex surface prep activator reduces fixture time to 5 minutes. Preceding values are for 3/8 inches - 16 steel as received nuts and bolts at 72 degrees F (22 degrees C). 1. Clean and dry parts using Permatex surface prep activator. 2. Shake threadlocker before each use. 3. Remove cap and snip nozzle tip. 4. Apply to threaded areas and assemble parts. Refer to technical data sheet for complete information. Note: Threadlocker is for use on active metal parts and is not to be used on plastics.
Warnings
Precautionary Statements—Prevention: Contains dimethyl hydroperoxide, cumene. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Use personal protective equipment as required. Do not breathe dust/fumes/gas/mist/vapors/spray. Use only outdoors or in a well-ventilated area. Wash face, hands and any exposed skin thoroughly after handling. WarningCauses skin irritation. Causes serious eye irritation. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure. Precautionary Statements—Response: If in Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on Skin: Wash with plenty of soap and water. if skin irritation or rash occurs: get medical advice/attention. Wash contaminated clothing before reuse. Keep out of the reach of children. Note: Threadlocker is for use on metal parts and is not to be used on plastics.Causes skin irritation.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.