Free delivery on first 3 orders. Terms apply.

Fast delivery

Get in as fast as 1 hour

It’s all local

Shop your favorites

Direct chat

Connect with shoppers

Gorilla Glue Epoxy, Steel Bond, Heavy Duty
Gorilla Glue Epoxy, Steel Bond, Heavy Duty

Gorilla Glue Epoxy, Steel Bond, Heavy Duty

2 each
Gorilla Glue Epoxy, Steel Bond, Heavy Duty

Gorilla Glue Epoxy, Steel Bond, Heavy Duty

2 each

100% satisfaction guarantee

Place your order with peace of mind.


KrogerKroger Delivery NowCostcoMeijerALDICVS®Fresh Thyme MarketALDI ExpressSam's ClubMeijer Express DeliveryWalgreensGordon Food ServicePetcoMarket DistrictLowe'sLucky's MarketMichaelsSephoraRestaurant DepotStaplesBJ's Wholesale ClubWeiland's MarketFresh Thyme Real ConvenienceJD SportsDICK'S Sporting GoodsOffice Depot OfficeMaxBest BuyFamily DollarGiant EaglePetSmartFive BelowThe Vitamin Shoppe®Dollar TreeSave A LotThe Container StoreTarget: Fast DeliveryCarfagna's MarketBig LotsBath & Body WorksGolf GalaxyFinish LineThe Wine ShopSunbasketPublic LandsKohl's

Kitchen Tropical Mango Veggie Smoothie

About

Details

New. Bond strength: 4250 PSI. Set Time: 10 min. Waterproof (Bonded wood materials should not be submerged or soaked in water). Cures dark grey. Bonds: Metal, plastics (Note: Not recommended for use on polyethylene, polypropylene or similar plastics), concrete, ceramics, PVS, fiberglass & more! Incredibly strong. Forms a permanent bond. Once cured, can be shaped, tapped, filed, sanded, and drilled. www.gorillatough.com. Made in USA with domestic and imported materials.


Directions

All surfaces should be clean and free of debris. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. 1. Remove cap from each tube and use top of cap to puncture foil seal. 2. Dispense equal parts from each tube onto a clean, disposable surface. 3. Mix with disposable mixing tool for approximately 20 seconds until color is uniform. 4. Apply to surface within 3 minutes. 5. Clamp surfaces together and leave undisputed for 10 to 40 minutes. Full cure in 24 hours. Cure time dependent on temperature, humidity and quantity applied. Set Time: 10 minutes. Cure Time: Full cure in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times. Temperature Range: Bond withstands -40 degrees F to 300 degrees F. Cured Color: Dark Grey. Clean Up: Remove excess wet glue with a dry cloth and acetone or mineral spirits following solvent manufacturer's recommendations. Usage: Use in a well ventilated area. Storage: After use, replace cap tightly on each tube. Store in a cool, dry place. Store away from children and animals.


Warnings

Hardener: Flammable. Irritant. Resin: Danger: harmful by skin absorption. Corrosive. Flammable. Store away from children and animals. Read cautions on back panel. Danger: Harmful by skin absorption. Corrosive. Flammable. Irritant. Do not swallow. Do not get in eyes or on skin or clothing. Do not use near heat, sparks, flames or while smoking. Handle with care. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Hardener contains methyl methacrylate, styrene-methyl methacrylate-butadiene polymer, and 3,5-diethyl-1,2-dihydro-1-phenyl-2-propylpyridine. Resin contains methyl methacrylate, Methacrylic acid, and styrene-methyl methacrylate-butadiene polymer. First Aid Treatment: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with soap and water. If on clothes, remove clothes. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186. Cancer and reproductive harm - www.P65Warnings.ca.gov.

About

Details

New. Bond strength: 4250 PSI. Set Time: 10 min. Waterproof (Bonded wood materials should not be submerged or soaked in water). Cures dark grey. Bonds: Metal, plastics (Note: Not recommended for use on polyethylene, polypropylene or similar plastics), concrete, ceramics, PVS, fiberglass & more! Incredibly strong. Forms a permanent bond. Once cured, can be shaped, tapped, filed, sanded, and drilled. www.gorillatough.com. Made in USA with domestic and imported materials.


Directions

All surfaces should be clean and free of debris. To improve adhesion, roughen smooth surfaces with sandpaper before gluing. 1. Remove cap from each tube and use top of cap to puncture foil seal. 2. Dispense equal parts from each tube onto a clean, disposable surface. 3. Mix with disposable mixing tool for approximately 20 seconds until color is uniform. 4. Apply to surface within 3 minutes. 5. Clamp surfaces together and leave undisputed for 10 to 40 minutes. Full cure in 24 hours. Cure time dependent on temperature, humidity and quantity applied. Set Time: 10 minutes. Cure Time: Full cure in 24 hours for load bearing weight. Application in cooler temperatures may cause longer cure times. Temperature Range: Bond withstands -40 degrees F to 300 degrees F. Cured Color: Dark Grey. Clean Up: Remove excess wet glue with a dry cloth and acetone or mineral spirits following solvent manufacturer's recommendations. Usage: Use in a well ventilated area. Storage: After use, replace cap tightly on each tube. Store in a cool, dry place. Store away from children and animals.


Warnings

Hardener: Flammable. Irritant. Resin: Danger: harmful by skin absorption. Corrosive. Flammable. Store away from children and animals. Read cautions on back panel. Danger: Harmful by skin absorption. Corrosive. Flammable. Irritant. Do not swallow. Do not get in eyes or on skin or clothing. Do not use near heat, sparks, flames or while smoking. Handle with care. Keep out of reach of children. Wear safety glasses and chemical resistant gloves. Use only in a well-ventilated area. Hardener contains methyl methacrylate, styrene-methyl methacrylate-butadiene polymer, and 3,5-diethyl-1,2-dihydro-1-phenyl-2-propylpyridine. Resin contains methyl methacrylate, Methacrylic acid, and styrene-methyl methacrylate-butadiene polymer. First Aid Treatment: If swallowed, call a Poison Control Center or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, rinse well with soap and water. If on clothes, remove clothes. If breathed in, move person into fresh air. For medical emergencies only, call 800-420-7186. Cancer and reproductive harm - www.P65Warnings.ca.gov.


Common questions

It's simple. Using the Instacart app or website, shop for products from your store of choice near you. Once you place your order, Instacart will connect you with a personal shopper in your area to shop and deliver your order. Contactless delivery is available with our "Leave at my door" option. You can track your order's progress and communicate with your shopper every step of the way using the Instacart app or website.

Learn more about how to place an order here.

Using the Instacart app or website, select a store of your choice near you that offers pickup, select Pickup, and then select your preferred pickup location from which you'd like to place your order.

Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.

Learn more about pickup orders here.

Here's a breakdown of Instacart delivery cost:

- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.

With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.

Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.

Learn more about Instacart pricing here.

When an item you want is out-of-stock at the store, your shopper will follow your replacement preferences.

You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:

- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.

Learn more about instructions for specific items or replacements here.

If something isn't right, you've got options. In the Instacart app or website, you can report:

- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders

If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.