Free delivery on first 3 orders. Terms apply.

Fast delivery

Get in as fast as 1 hour

It’s all local

Shop your favorites

Direct chat

Connect with shoppers

Use Next and Previous buttons to navigate or jump to a slide with the slide dots.
BLACK+DECKER Feed Spool, Bump
BLACK+DECKER Feed Spool, Bump
BLACK+DECKER Feed Spool, Bump
BLACK+DECKER Feed Spool, Bump
BLACK+DECKER Feed Spool, Bump
BLACK+DECKER Feed Spool, Bump

BLACK+DECKER Feed Spool, Bump

1 each
BLACK+DECKER Feed Spool, Bump

BLACK+DECKER Feed Spool, Bump

1 each

100% satisfaction guarantee

Place your order with peace of mind.


KrogerKroger Delivery NowCostcoMeijerALDICVS®Fresh Thyme MarketALDI ExpressSam's ClubMeijer Express DeliveryWalgreensGordon Food ServicePetcoMarket DistrictLowe'sLucky's MarketMichaelsSephoraRestaurant DepotStaplesBJ's Wholesale ClubWeiland's MarketFresh Thyme Real ConvenienceJD SportsDICK'S Sporting GoodsOffice Depot OfficeMaxBest BuyFamily DollarGiant EaglePetSmartFive BelowThe Vitamin Shoppe®Dollar TreeSave A LotThe Container StoreTarget: Fast DeliveryCarfagna's MarketBig LotsBath & Body WorksGolf GalaxyFinish LineThe Wine ShopSunbasketPublic LandsKohl's

Kitchen Tropical Mango Veggie Smoothie

About

Details

Fits: CST500, CST800, GE600, ST1000, ST200, ST300, ST3000, ST400, ST4000, ST4400, ST4500, ST5000, ST6500, ST6800. 20 ft./0.065 in. 6,1 m/1,65 mm. Factory wound for maximum reliability. All Black+Decker replacement line is premium quality monofilament nylon to reduce splitting and fraying for maximum trimming performance. www.BlackandDecker.com. String made in France. Assembled in China.


Directions

Instructions for String Trimmer Line Replacement: 1. Unplug the tool. Remove cap by pushing two tabs in and up, then lift off. (It is not necessary to push both tabs in at the same time). Remove any debris and grass build up that may be inside the cap and on the inside of the hole in the cap. 2. Remove spool by aligning the notch on the edge of the spool with the eyelet in the hub and pulling straight out. Be careful not to lose the spring. Discard old spool and remove tape from new spool. Remove any debris that may be inside the hub and wipe any dirt off the ribs on the shaft. 3. Unwind about 3 in (76 mm) of line from the spool and hold it in one of the two notches. Make sure spring is in place on the hub. 4. Holding the line in the gap, insert the end through the eyelet in the hub and slip the spool into the hub. If the spool does not slip into the hub easily, press gently and pull straight out on the cutting line that protrudes through the eyelet. 5. Install cap by pushing both snap legs into the hub at once. Make sure that both legs are snapped securely in one place. Pull line out by hand until tight. The line should extend out no further than the guard. You are now ready to resume trimming. The cut-off blade will automatically trim excess line to the proper length.


Warnings

Always wear eye protection. Unplug tool before changing, installing, or removing accessories. Read tool instruction manual for additional safety precautions before using this accessory.

About

Details

Fits: CST500, CST800, GE600, ST1000, ST200, ST300, ST3000, ST400, ST4000, ST4400, ST4500, ST5000, ST6500, ST6800. 20 ft./0.065 in. 6,1 m/1,65 mm. Factory wound for maximum reliability. All Black+Decker replacement line is premium quality monofilament nylon to reduce splitting and fraying for maximum trimming performance. www.BlackandDecker.com. String made in France. Assembled in China.


Directions

Instructions for String Trimmer Line Replacement: 1. Unplug the tool. Remove cap by pushing two tabs in and up, then lift off. (It is not necessary to push both tabs in at the same time). Remove any debris and grass build up that may be inside the cap and on the inside of the hole in the cap. 2. Remove spool by aligning the notch on the edge of the spool with the eyelet in the hub and pulling straight out. Be careful not to lose the spring. Discard old spool and remove tape from new spool. Remove any debris that may be inside the hub and wipe any dirt off the ribs on the shaft. 3. Unwind about 3 in (76 mm) of line from the spool and hold it in one of the two notches. Make sure spring is in place on the hub. 4. Holding the line in the gap, insert the end through the eyelet in the hub and slip the spool into the hub. If the spool does not slip into the hub easily, press gently and pull straight out on the cutting line that protrudes through the eyelet. 5. Install cap by pushing both snap legs into the hub at once. Make sure that both legs are snapped securely in one place. Pull line out by hand until tight. The line should extend out no further than the guard. You are now ready to resume trimming. The cut-off blade will automatically trim excess line to the proper length.


Warnings

Always wear eye protection. Unplug tool before changing, installing, or removing accessories. Read tool instruction manual for additional safety precautions before using this accessory.


Common questions

It's simple. Using the Instacart app or website, shop for products from your store of choice near you. Once you place your order, Instacart will connect you with a personal shopper in your area to shop and deliver your order. Contactless delivery is available with our "Leave at my door" option. You can track your order's progress and communicate with your shopper every step of the way using the Instacart app or website.

Learn more about how to place an order here.

Using the Instacart app or website, select a store of your choice near you that offers pickup, select Pickup, and then select your preferred pickup location from which you'd like to place your order.

Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.

Learn more about pickup orders here.

Here's a breakdown of Instacart delivery cost:

- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.

With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.

Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.

Learn more about Instacart pricing here.

When an item you want is out-of-stock at the store, your shopper will follow your replacement preferences.

You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:

- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.

Learn more about instructions for specific items or replacements here.

If something isn't right, you've got options. In the Instacart app or website, you can report:

- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders

If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.