Fast delivery
Get in as fast as 1 hour
It’s all local
Shop your favorites
Direct chat
Connect with shoppers
About
Details
Removes carbon, gum and varnish deposits. No CFCs: Contains no CFCs which deplete the ozone layer. Helps restore carburetor performance by removing gum, varnish, carbon deposits and dirt build-up. Cleans and frees automatic chokes, carburetor linkage, fuel injection intake systems, manifold heat controls and PCV smog valve. Steel. Made in USA.
Directions
Automatic Chokes - Remove air cleaner, disconnect heat riser tube, remove choke cover, but first mark position, take out baffle plate. Spray contents on the vacuum piston and cylinder and then on both ends of choke valve shaft. Keep working choke until it becomes free. Start engine and spray the piston and cylinder while working the choke by hand. Replace baffle plate, choke cover, heat riser tube and air cleaner. Carburetor Linkage - Spray on dirty or oily linkage. let set for a few seconds and flush off by spraying again. Fuel Injection Intake Systems - Dismantle and/or access fuel injection air and fuel intake systems. Spray liberally to instantly dissolve baked-on gum, carbon, soil and resin deposits. Manifold Heat Controls - Spray on exposed part of heater valve shaft while engine is cold. Let fluid penetrate. then move counterweight up and down until valve is free. PCV Smog Valve - Disconnect crankcase side of the PCV valve, leave vacuum side corrected. Apply by inserting snorkel tube into open end of valve while working valve, let soak for 3 minutes. Start engine and spray again into valve to completely flush valve out. Reconnect, idle for a few minutes.
Warnings
Danger: Extremely flammable. Vapor harmful. Harmful or fatal is swallowed. Skin and eye irritant. Contents under pressure. Read back panel carefully. Danger: Contains Acetone (CAS No. 67-64-1), Xylene (CAS No. 1330-20-7), 2-Butoxyethanol (CAS 111-76-2), Carbon Dioxide (Propellant) (CAS No. 124-38-9), and Phenylethane (CAS No. 100-41-4). Extremely flammable. Do not puncture or incinerate container. Do not expose to heat sources including sparks and open flames or store at temperatures above 120 degrees F. Use only in well ventilated area. Inhalation of vapors may be harmful or fatal. Avoid breathing vapors. If overcome by vapor, move to fresh air. Eye and skin irritant. Avoid contact with eyes or prolonged skin contact. If contact or skin irritation occurs, flush area with large amounts of water for 15 minutes. If medical symptoms or irritation persists, seek medical attention. Harmful or fatal if swallowed. Do not take internally. If swallowed, do not induce vomiting. Call physician immediately, or poison control center for instructions. This product contains chemicals known by the State of California to cause cancer, birth defects or other reproductive harm. Read the MSDS before using. Keep out of reach of children.
About
Details
Removes carbon, gum and varnish deposits. No CFCs: Contains no CFCs which deplete the ozone layer. Helps restore carburetor performance by removing gum, varnish, carbon deposits and dirt build-up. Cleans and frees automatic chokes, carburetor linkage, fuel injection intake systems, manifold heat controls and PCV smog valve. Steel. Made in USA.
Directions
Automatic Chokes - Remove air cleaner, disconnect heat riser tube, remove choke cover, but first mark position, take out baffle plate. Spray contents on the vacuum piston and cylinder and then on both ends of choke valve shaft. Keep working choke until it becomes free. Start engine and spray the piston and cylinder while working the choke by hand. Replace baffle plate, choke cover, heat riser tube and air cleaner. Carburetor Linkage - Spray on dirty or oily linkage. let set for a few seconds and flush off by spraying again. Fuel Injection Intake Systems - Dismantle and/or access fuel injection air and fuel intake systems. Spray liberally to instantly dissolve baked-on gum, carbon, soil and resin deposits. Manifold Heat Controls - Spray on exposed part of heater valve shaft while engine is cold. Let fluid penetrate. then move counterweight up and down until valve is free. PCV Smog Valve - Disconnect crankcase side of the PCV valve, leave vacuum side corrected. Apply by inserting snorkel tube into open end of valve while working valve, let soak for 3 minutes. Start engine and spray again into valve to completely flush valve out. Reconnect, idle for a few minutes.
Warnings
Danger: Extremely flammable. Vapor harmful. Harmful or fatal is swallowed. Skin and eye irritant. Contents under pressure. Read back panel carefully. Danger: Contains Acetone (CAS No. 67-64-1), Xylene (CAS No. 1330-20-7), 2-Butoxyethanol (CAS 111-76-2), Carbon Dioxide (Propellant) (CAS No. 124-38-9), and Phenylethane (CAS No. 100-41-4). Extremely flammable. Do not puncture or incinerate container. Do not expose to heat sources including sparks and open flames or store at temperatures above 120 degrees F. Use only in well ventilated area. Inhalation of vapors may be harmful or fatal. Avoid breathing vapors. If overcome by vapor, move to fresh air. Eye and skin irritant. Avoid contact with eyes or prolonged skin contact. If contact or skin irritation occurs, flush area with large amounts of water for 15 minutes. If medical symptoms or irritation persists, seek medical attention. Harmful or fatal if swallowed. Do not take internally. If swallowed, do not induce vomiting. Call physician immediately, or poison control center for instructions. This product contains chemicals known by the State of California to cause cancer, birth defects or other reproductive harm. Read the MSDS before using. Keep out of reach of children.
Common questions
Learn more about how to place an order here.
Then, when you arrive at the store of your choice, use the Instacart app to notify us. Depending on the store, a shopper or store employee will bring the groceries to your car, or you can pick them up at the designated area.
Learn more about pickup orders here.
- Delivery fees start at $3.99 for same-day orders over $35. Fees vary for one-hour deliveries, club store deliveries, and deliveries under $35.
- Service fees vary and are subject to change based on factors like location and the number and types of items in your cart. Orders containing alcohol have a separate service fee.
- Tipping is optional but encouraged for delivery orders. It's a great way to show your shopper appreciation and recognition for excellent service. 100% of your tip goes directly to the shopper who delivers your order.
With an optional Instacart+ membership, you can get $0 delivery fee on every order over $35 and lower service fees too.
Instacart pickup cost:
- There may be a "pickup fee" (equivalent to a delivery fee for pickup orders) on your pick up order that is typically $1.99 for non-Instacart+ members. Instacart+ membership waives this like it would a delivery fee.
- Pick up orders have no service fees, regardless of non-Instacart+ or Instacart+ membership.
Learn more about Instacart pricing here.
You can set item and delivery instructions in advance, as well as chat directly with your shopper while they shop and deliver your items. You can tell the shopper to:
- Find Best Match: By default, your shopper will use their best judgement to pick a replacement for your item.
- Pick Specific Replacement: You can pick a specific alternative for the shopper to purchase if your first choice is out-of-stock.
- Don't Replace: For items you'd rather not replace, choose "Don't replace" to get a refund if the item is out of stock.
Learn more about instructions for specific items or replacements here.
- Missing items
- Incorrect items
- Damaged items
- Poor replacements
- Early/late orders
If an order never came, or you get someone else's order, you can reach out to Instacart Customer Experience.