Holds 3 lb/1.3 kg. New! Damage-free hanging. Holds strongly. Removes cleanly. Rust resistant. Proven to hold better than suctions cups. Bath. Water resistant strips. Towel bar can be reused with Command bath medium refill strips. Limited Warranty and Limited of Liability [For Product Sold in USA]: This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Save instructions or visit command.com. Towel bar made in China. Strips made in USA.
Failure to follow instructions carefully may cause damage. Apply: 1. If possible, choose a spot where strips are not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Separate strips. Remove blue liners. Press 2 strips to each mounting base. 4. Remove black liners. Press towel bar to wall for 10 seconds. 5. To ensure adhesive hold, slide towel bar up and off. 6. Press each base firmly for 30 seconds. 7. Wait 24 hours to allow adhesive to build. Then slide towel bar back onto the mounting bases. Remove: 1. Slide towel bar up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch each strip slowly against the wall at least 12 inches to release.
Failure to follow instructions carefully may cause damage. Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15°-125°F.
Holds 3 lb/1.3 kg. New! Damage-free hanging. Holds strongly. Removes cleanly. Rust resistant. Proven to hold better than suctions cups. Bath. Water resistant strips. Towel bar can be reused with Command bath medium refill strips. Limited Warranty and Limited of Liability [For Product Sold in USA]: This product will be free from manufacturing defects. If defective, your exclusive remedy shall be, at 3M's option, product replacement or refund. 3M will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential. Save instructions or visit command.com. Towel bar made in China. Strips made in USA.
Failure to follow instructions carefully may cause damage. Apply: 1. If possible, choose a spot where strips are not over grout lines. 2. Clean surface with rubbing alcohol. Do not use household cleaners. 3. Separate strips. Remove blue liners. Press 2 strips to each mounting base. 4. Remove black liners. Press towel bar to wall for 10 seconds. 5. To ensure adhesive hold, slide towel bar up and off. 6. Press each base firmly for 30 seconds. 7. Wait 24 hours to allow adhesive to build. Then slide towel bar back onto the mounting bases. Remove: 1. Slide towel bar up and off. 2. Gently hold mounting base in place. 3. Never pull the strip towards you! Always pull straight down. 4. Stretch each strip slowly against the wall at least 12 inches to release.
Failure to follow instructions carefully may cause damage. Caution: Do not hang over beds or on wallpaper. Do not hang valuable or irreplaceable items or framed pictures. Apply and use 15°-125°F.