Get in as fast as 1 hour
Shop your favorites
Connect with shoppers
May 2023
Customer since 2023
Woodbridge, VA
May 2023
Customer since 2015
Alexandria, VA
May 2023
Customer since 2021
Falls Church, VA
Bonds:Aluminum, Acrylic, Metal, Plastic, Vinyl, Leather, Rubber & More
Permatex® Super Glue is a fast-drying, super strong adhesive that forms a long lasting bond. Easy to apply, self-piercing tube. Works best on non-porous surfaces.
Directions: Tube must be pierced before using! Point tube away from face and body. Do not squeeze tube while puncturing. 1. To puncture, screw nozzle and cap assembly onto tube completely. 2. Protect work surfaces. Clean and ensure a close fit on the surfaces to be bonded. 3. To use, remove outer cap. Use sparingly. 4. Apply glue to one surface to be bonded. 5. Press pieces together for 15 to 30 seconds. 6. Clean tip after use. Replace outer cap and store glue in cool, dry place. Note: Not recommended for use on glass, foam rubber and cloth. Will not bond to polyethylene or polypropylene plastic.
Caution: Contains Ethyl cyanoacrylate, Poly (methyl methacrylate). Skin contact through clothing may cause burns. In case of eye or skin contact, flush with water for 15 minutes; call a physician. Carefully peel or roll skin apart (do not pull). If spilled on clothing, flush with large amounts of water. See Safety Data Sheet for complete GHS hazard communication. Keep out of reach of children.
Bonds:Aluminum, Acrylic, Metal, Plastic, Vinyl, Leather, Rubber & More
Permatex® Super Glue is a fast-drying, super strong adhesive that forms a long lasting bond. Easy to apply, self-piercing tube. Works best on non-porous surfaces.
Directions: Tube must be pierced before using! Point tube away from face and body. Do not squeeze tube while puncturing. 1. To puncture, screw nozzle and cap assembly onto tube completely. 2. Protect work surfaces. Clean and ensure a close fit on the surfaces to be bonded. 3. To use, remove outer cap. Use sparingly. 4. Apply glue to one surface to be bonded. 5. Press pieces together for 15 to 30 seconds. 6. Clean tip after use. Replace outer cap and store glue in cool, dry place. Note: Not recommended for use on glass, foam rubber and cloth. Will not bond to polyethylene or polypropylene plastic.
Caution: Contains Ethyl cyanoacrylate, Poly (methyl methacrylate). Skin contact through clothing may cause burns. In case of eye or skin contact, flush with water for 15 minutes; call a physician. Carefully peel or roll skin apart (do not pull). If spilled on clothing, flush with large amounts of water. See Safety Data Sheet for complete GHS hazard communication. Keep out of reach of children.