Details

Car. Truck. Inboard. Motorcycle. Tractor. Snowmobile. Outboard. Snowblower. Lawnmower. Chainsaw. Auto; Marine; Fleet. EPA registered. Cleaner engines can reduce emissions. Helps reduce hesitations and rough idle. For gas and diesel engines to help: clean injectors; clean carb jets; stabilize fuels; control moisture in fuels; quiet noisy lifters; clean deposits; add lubricity to fuel; lube upper cylinders; de-ice & anti-gel. Use in gas, gas-ethanol blends, diesel or biodiesel blends. Use in oil. Use in injector & induction cleaning machines. Internal engine use only: 2-cycle; 4-cycle; Diesel; Cars; trucks; boats; tractors; small engines. When aerosol Sea Foam is desired, use Sea Foam Spray Top Engine Cleaner & Lube. Guarantee: Sea Foam is sold on the basis of: your money's worth or your money back. Facebook. This gasoline additive is safe for use in all gasoline engines. This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road equipment engines. For more information go to: www.seafoamsales.com. Since 1942. Steel. Quick Action: A petroleum-based product for use in all gasoline and diesel type engines, both 2-cycle and 4-cycle engines. Sea Foam can be used continuously in all fuels or preventative maintenance. Oxygen sensor safe. Cleans dirty engine parts internally by helping remove gum, varnish and deposits. Works and performs quickly. Helps control moisture in fuel tanks. Helps stabilize and condition fuels for engine storage. Helps reduce hesitations and rough idle due to deposit build-up. When Added to Crankcase (Oil) Helps: Quiet noisy lifters and clean dirty parts due to deposit build-up one pint of Sea Foam will treat 16 quarts of oil. (Use 1 oz. per qt) For use in all motor oils including synthetic. Can be used before or after oil change. When oil becomes dirty, change oil. When Used in Fuel Line, Vacuum or Induction Systems Helps: Clean intake valves & pistons due to deposit build-up; Reduce hesitations & rough idle due to deposit build-up; Restore power & pickup lost due to deposit build-up; Clean throttle plate due to deposit build-up. The safest and most effective way without professional assistance to induce Sea Foam into the top end of engines is to use Sea Foam Spray Top Engine Cleaner and Lube with cleaning tube and patented S-Tool Hook Guide. To perform this procedure through the air induction systems on all 2-cycle and 4-cycle engines just follow all instructions and illustrations on the Sea Foam Spray Top Engine Cleaner and Lube can. Sea Foam is not for use through diesel air intake systems. Very Important: Only professional certified technicians should use the vacuum cylinders, as this varies with every engine. For use in injector cleaning machines, use 50% Sea Foam 50% fuel. For use in induction cleaning machines as directed. Prime diesel fuel filters with Sea Foam for best results to help clean injects. Safe to use Sea Foam Motor Treatment with a higher ratio in fuel for cleaning. A ratio of 50% Sea Foam and 50% fuel maximum. When Added to Gas or Diesel Fuel Tanks Helps: Clean fuel injectors & carb jets due to deposit build-up. Control moisture in fuel. Condition diesel fuels, de-ice & anti-gel. Lube upper cylinders. Stabilize fuels. Use 1 oz. per gallon in all types of gas or diesel engines, including all oil-injecting 2-cycle engines. When used in small (2-cycle or 4-cycle) engines helps: Restores power lost due to deposit build-up. Control moisture in fuels. Clean injectors and carb jets due to deposit build-up. Smooth rough idle due to deposit build-up. Stabilize fuels. Use 1 oz. per gallon on all 4-cycle engine fuel and all oil-injected 2-cycle engine for use 2 oz. per gallon on all 2-cycle pre-mixed fuel. Add more to clean, less to motor. Does not replace oil. Use continuously. For tune-up of smaller engines, induce Sea Foam direct into fuel line or air intake system while engine is running. Stop and let soak for 5 minutes, restart engine to clear extreme exhaust. Repeat as needed. To store and fog engines, slowly induce Sea Foam into air intakes and spark-plug holes, saturating internal parts. When aerosol Sea Foam is desired, use Sea Foam Spray Top Engine Cleaner & Lube. Use Sea Foam every 2,000 to 5,000 miles for maintenance. Blended and packaged in USA.

Ingredients

Contains Pet. Distillate (cas 64742-49-0) (cas 64742-47-8); Pet. Oil (cas 64742-54-7); 2-propanol (cas 67-63-0)

Directions

Instant action.

A 100% pure petroleum product for use in all gasoline and diesel type engines, both 2-cycle and 4-cycle. Oxygen sensor safe.

Cleans dirty engine parts internally by removing harmful gums, varnish and carbon. Works and performs instantly.

Removes moisture from oil crankcases and fuel tanks.

Stabilizes and conditions fuels. Use for engine storage.

Cures hesitations, stalls, pings and rough idle due to carbon buildup.

Helps pass emissions tests. EPA registered.

When added to crankcase (oil).

Frees sticky lifters & rings.

Cleans dirty parts.

Removes moisture.

Increases RPM's vacuum and compression.

Cleans PCV valve systems.

One pint treats 10 quarts of oil (avg. 1 1/2 oz per qt). For use in all motor oils including synthetic. Can be used before oil change or for long term cleaning. When oil becomes dirty, change oil.

When added to gas or diesel fuel tanks.

Cleans fuel injectors & carb, jets.

Cleans carbon as you drive.

Lubricates upper cylinders.

De-ices and removes moisture.

Diesel fuel conditioner & anti gel.

Stabilizes fuel.

One pint treats 8-25 gallons of all types of gas or diesel fuels (avg. 1 oz per gallon).

When used in fuel line, vacuum or induction cleaning systems.

Cleans carbon build up.

Gives smoother idle.

Cures hesitations & pings.

Cleans intake valves & pistons.

Cleans catalytic converter odors.

Restores power & pickup.

With warm engine running - important: slowly induce 1/3 pint direct into vacuum line. Important: before any vacuum lines are used, check with a certified technician to make sure lines feed all cylinders safely as this varies with each engine.

Turn ignition off. Restart engine after 5 minutes. Be sure exhaust is well-ventilated.

Fumes will be extreme for a short time. To perform this procedure safely through the air induction systems on all 2-cycle and 4-cycle engines without professional assistance, Sea Foam® spray cleaner & lube can be used as per instructions on can.

For use in injector cleaning machines, use 50% Sea Foam® 50% fuel.

For use in carbon cleaning machines as directed.

Fill diesel fuel filters with Sea Foam® to clean injectors fast.

Sea Foam® is not for use through diesel air intake systems.

When used in small (2-cycle or 4-cycle) engines.

Cleans carbon build up.

Cleans carb, jets and injectors.

Stabilizes fuel.

Restores power.

Smooths rough idle.

Removes moisture.

One pint treats 8 to 25 gal in all types of gas (avg. 1 oz per gal) or 6 to 12 gal in all types of gas oil mix (avg 2 oz per gal) for cleaning and stabilizing. Add more to clean, less to maintain. Does not replace oil. Use frequently. For tune-up of small engines, induce Sea Foam® direct into fuel line or air intake system while engine is running. Stop and let soak for 5 minutes, restart engine to clear extreme exhaust.

Repeat as needed. To store & fog engines, induce Sea Foam® into air intake system and spark-plug holes, saturating internal parts. When aerosol Sea Foam® is desired, use Sea Foam® spray cleaner & lube.

For peak performance, use Sea Foam® every 2,000 to 5,000 miles.

Warnings

Danger: Flammable. Harmful or fatal if swallowed. Carefully read other precautions on side panel. Danger: Flammable. Keep out of reach of children. Contains petroleum distillates. Use with adequate ventilation. Avoid contact with skin or repeated breathing of vapor. Do not get in eyes. If in eyes, flush with water and see physician. If swallowed, call a physician, do not induce vomiting. Use in accordance with all local, State and Federal regulations.